Apollo's CAST-1 is a line out. The vendor says the cloud is not required.
Apollo prices CAST-1 at 34.99 dollars and says the ESPHome player needs no cloud account. Cables are extra. An October 19 review is the second account.
The short version
The product page describes a 34.99 dollar ESP32-S3 board that feeds a 3.5 millimeter line into speakers the buyer already owns, running ESPHome, and it states that no cloud account is required. The box, the vendor's own note says, does not include the cables or the power adapter.
A line out, priced on the product page
Apollo's CAST-1 page lists a regular price of 34.99 dollars for a board that plugs into powered speakers, an amplifier, or a receiver through a 3.5 millimeter cable. The microcontroller is an ESP32-S3 with 16 megabytes of flash and 8 megabytes of PSRAM. The converter is a Texas Instruments PCM5122. Power is USB-C at 5 volts and 1 ampere. Firmware is named as ESPHome. The page's specification line for the cloud reads none. That line is the vendor's sentence about where the player looks for an account.what local control requires.
The announcement admits what the box omits
Apollo's own announcement says the board is not a speaker, has no amplifier, and ships alone. The USB-C cable, the power adapter, the audio cable, and an optional Ethernet board are separate purchases. It also says Sendspin multi-room sync is a technical preview: usable, still moving, and not a promise of finished stability. A product page that says the cloud is unnecessary can still leave the buyer holding an incomplete kit.the smart homes desk.
Discovery is local name service, as the vendor describes it
The product page says the board appears through mDNS in Music Assistant and Home Assistant, and that Wi-Fi is 2.4 gigahertz, with Ethernet only if the buyer adds a W5500 board. Bluetooth proxy support is listed, which extends a controller's radio into the room. A proxy is still a radio. It is not, by itself, proof that audio samples left the house. The vendor's cloud line is the sentence that speaks to that question.a device that mints its own name.
The October 19 review is the wire's account
SmartHomeScene published a review on October 19, 2026, of the CAST-1 as local audio for Home Assistant. The review is why the board is on today's wire. This brief uses it as a second description of the same object, and it keeps the specifications on the product page. A review can confirm that a reviewer heard sound. It does not become the schematic. Asked directly, What is the October 19 review? SmartHomeScene's review of local audio streaming for Home Assistant. It is a second account of the same board. It does not replace the product page's specifications.Futureweb.
Music Assistant is optional in the vendor's telling
The announcement says the board can play as a Sendspin target inside Music Assistant without Home Assistant, and that Home Assistant is what adds announcements and alerts. It also says that without Music Assistant the board still works as an ESPHome media player. Two software stacks, one board. Neither stack, on these pages, is described as a vendor login. Asked directly, What is missing from the box? The announcement says the box contains the board only. A USB-C cable, a power adapter, and a 3.5 millimeter cable are sold separately. The board is not a speaker and has no amplifier.sensors that stay on the LAN.
What this page will not certify
It will not say the audio path was measured with the upstream link unplugged. It will not treat a technical preview as finished whole-home sync. It will not add a listening-test score the review's place on the wire does not require. The dependency is the vendor's claim that the player is local, plus a second account that the board exists and plays. Asked directly, What does the vendor say about multi-room sync? Sendspin, from the Open Home Foundation, is supported, and the announcement calls that sync a technical preview that works and is still changing. The vendor tells a reader who wants finished multi-room sync to wait.
What would falsify the cloud line
A packet capture, a required account screen, or a firmware update that refuses to boot offline would change the record. Until one of those is public, the page a buyer can read says cloud required, none, and the announcement says the sync feature is still a preview. Those are different sentences, and both are the vendor's. Asked directly, What does the page say about a cloud account? It lists cloud required as none, and it says the firmware is ESPHome, locally controlled. That is the vendor's claim about this product. It is not a test this desk ran with the network cable pulled.
A seller's note is not a third laboratory
A September shop post from a reseller says the board showed up in Home Assistant and played through Music Assistant. That is an unboxing. It agrees with the product page about the path. It does not add a parts list. This brief leaves the specifications on Apollo's pages. Asked directly, What chip and price does the product page name? An Espressif ESP32-S3, and a regular price of 34.99 dollars. The page also names a Texas Instruments PCM5122 digital-to-analog converter and a 3.5 millimeter stereo line out.
What stays on the record
34.99 dollars, an ESP32-S3, a line out, ESPHome, a vendor sentence that no cloud account is required, cables sold separately, Sendspin marked as a preview, and an October 19 review. The speaker the buyer already owns is still the thing that makes sound. The short answer this page will stand on is this: The product page describes a 34.99 dollar ESP32-S3 board that feeds a 3.5 millimeter line into speakers the buyer already owns, running ESPHome, and it states that no cloud account is required. The box, the vendor's own note says, does not include the cables or the power adapter.
Sources
The reports this brief is filing. Futureweb did not republish them.
Questions
What chip and price does the product page name?
An Espressif ESP32-S3, and a regular price of 34.99 dollars. The page also names a Texas Instruments PCM5122 digital-to-analog converter and a 3.5 millimeter stereo line out.
What does the page say about a cloud account?
It lists cloud required as none, and it says the firmware is ESPHome, locally controlled. That is the vendor's claim about this product. It is not a test this desk ran with the network cable pulled.
What is missing from the box?
The announcement says the box contains the board only. A USB-C cable, a power adapter, and a 3.5 millimeter cable are sold separately. The board is not a speaker and has no amplifier.
What does the vendor say about multi-room sync?
Sendspin, from the Open Home Foundation, is supported, and the announcement calls that sync a technical preview that works and is still changing. The vendor tells a reader who wants finished multi-room sync to wait.
What is the October 19 review?
SmartHomeScene's review of local audio streaming for Home Assistant. It is a second account of the same board. It does not replace the product page's specifications.